Hyundai Azera: Engine Hanger Components and Components Location

Engine And Transmission Assembly Repair procedures

Removal     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. ...

Engine Hanger Repair procedures

Removal and Installation [Front engine hanger] 1. Remove the front engine hanger (A) Tightening torque: 44.1 ~ 53.6N.m (4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft) 2. Install in the reverse ord ...

See also:

Crankshaft Damper Pulley Components and Components Location
Components 1. Crankshaft damper pulley ...

Assist Handle Repair procedures
Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Put on gloves to protect your hands. 1. ...

Battery Repair procedures
Removal and Installation 1. Remove the air duct (B). 2. Disconnect the negative terminal (A) from the battery. Tightening torque : 3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft) 3. D ...