Removal and Installation |
1. |
Disconnect the battery negative terminal. |
2. |
To release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A). |
3. |
Installation is reverse order of removal |
Mode Control Actuator Description and Operation
Description
The mode control actuator is located at the heater unit.
It adjusts position of mode door by operating mode control
actuator based on signal of A/C control unit. Pressing mode select ...
Inside Rear View Mirror Components and Components Location
Component Location
1. Inside rear view mirror
...
Manifold Absolute Pressure Sensor (MAPS) Schematic Diagrams
Circuit Diagram
...