Hyundai Equus Manuals

Hyundai Azera: Idler Repair procedures - Timing System - Engine Mechanical System - Hyundai Azera 2011-2025 Service ManualHyundai Azera: Idler Repair procedures

Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the drive belt idler (A).

Tightening torque :
52.9 ~ 57.9N.m (5.4 ~ 5.9kgf.m, 39.1 ~ 42.7lb-ft)

3.
Installation is reverse order of removal
Idler Components and Components Location
Components 1. Idler ...

Drive Belt Tensioner Components and Components Location
Components 1. Drive belt tensioner ...

See also:

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Features of your vehicle
Satellite radio reception You may experience difficulties in receiving XM™ satellite radio signals in the following situations. If you are driving in a tunnel or a covered parking area. If y ...

Passenger Airbag (PAB) Module Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. (Refer to Body - "Glove box housing") 3. Remo ...

Categories

Hyundai Azera Manuals


© 2011-2025 Copyright www.hgmanual.com