Hyundai Equus Manuals

Hyundai Azera: Cooling Fan Repair procedures - Cooling System - Engine Mechanical System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Cooling Fan Repair procedures

Removal and Installation
1.
Remove the battery and tray.
2.
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner")
3.
Loosen the upper hose fixing bolt (A), and disconnect the fan motor connector (B)

   
The radiator hoses are still connected.
4.
Remove cooling fan assembly (A).

Tightening torque :
3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft)

5.
Installation is reverse order of removal
Cooling Fan Components and Components Location
Components 1. Cooling fan2. Fan motor3. Fan shroud ...

Radiator Components and Components Location
Components 1. Radiator2. Radiator mounting bracket3. Radiator cap4. Drain plug5. Mounting insulator ...

See also:

Rear Disc Brake Repair procedures
Removal 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Loosen the bolt & nut and then disconnect the shock absorbe ...

Digital clock (if equipped)
WARNING Do not adjust the clock while driving. You may lose your steering control and cause an accident that results in severe personal injury or death. Whenever the battery terminals or relate ...

GAWR (Gross axle weight rating)
This is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the certification label. The total load on each axle must never exceed its GAWR. ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com