Hyundai Azera: Water Temperature Control Assembly Components and Components Location

Reservoir Tank Repair procedures

Removal and Installation 1. Disconnect the over flow hose (A), and then remove the resorvior tank (B). Tightening torque: 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft) 2. Installation ...

Water Temperature Control Assembly Repair procedures

Removal and Installation 1. Remove the radiator upper hose and lower hose. (Refer to Cooling System - "Radiator Hose") 2. Disconnect the throttle body water hoses. (Refer to Fuel System - ...

See also:

Thermostat Components and Components Location
Components 1. Water temperature control assembly2. Thermostat3. Water inlet fitting ...

Water pump Repair procedures
Removal 1. Drain the coolant. (Refer to Cooling System - "Coolant") 2. Remove the drive belt. (Refer to Timing System - "Drive Belt") 3. Remove the water pump pulley (A). 4. Remove ...

Compressor Repair procedures
Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negati ...