Circuit Diagram |
Canister Close Valve (CCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specific ...
Fuel Filler Door Release Actuator Repair procedures
Inspection
1.
Open the fuel filler door and remove the fuel filler door release actuator (A) after loosening the mounting bolts.
2.
Remove the luggage side trim [LH].
(Refer to Body - "Trunk ...
Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). Green arrow indicators on the instrument
panel indicate which turn si ...