Hyundai Azera: 26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications
| Specifications |
Direct control VFS[26/B]
? Control type : Normal low type
| Control Pressure [kpa (kgf/cm?, psi)] | 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) |
| Current value(mA) | 50~850 |
| Internal resistance(?) | 5.1 |
26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation
Description
26 brake control solenoid valve(26/B) is attached to the
valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the 26 brake. ...
26 Brake Control Solenoid Valve(26/B_VFS) Schematic Diagrams
Circuit Diagram
...
See also:
Reservoir Tank Repair procedures
Removal and Installation
1.
Disconnect the over flow hose (A), and then remove the resorvior tank (B).
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Installation ...
Input Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of Input & output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
Removal
1.
Remove the battery and the battery ...
Condenser Repair procedures
Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent,
gently bend them using a screwdriver or pliers.
...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com