Hyundai Equus Manuals

Hyundai Azera: Front Lower Arm Repair procedures - Front Suspension System - Suspension System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Front Lower Arm Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Suspension System / Front Suspension System / Front Lower Arm Repair procedures

Replacement
1.
Remove the front wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

   
Be careful not to damage to the hub bolts when removing the front wheel & tire.
2.
Loosen the bolt & nut and then remove the lower arm (A).
Tightening torque:
98.1~117.7N.m (10.0~12.0kgf.m, 72.3 ~ 86.6lb-ft)

3.
Loosen the bolts & nuts. and than Remove the front lower arm (A).
Tightening torque
Front :
117.7~137.3N.m(12.0~14.0Kgf.m, 86.8~101.3lb-ft)
Rear :
156.9~176.5N.m(16.0~18.0Kgf.m, 115.7~130.2-ft)

4.
Installation is the reverse of removal.
Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the lower arm for deformation.
3.
Check the all bolts and nuts.
4.
Check the ball joint dust cover for crack
Front Strut Assembly Repair procedures
Replacement 1. Remove the front wheel & tire (A). Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bolts ...

Front Stabilizer Bar Repair procedures
Replacement 1. Remove the front wheel & tire (A). Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     • Be careful not to damage to the hub b ...

See also:

Engine Hanger Components and Components Location
Components Location ...

Output Speed Sensor Troubleshooting
Signal Waveform Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...

Front Impact Sensor (FIS) Components and Components Location
Components ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com