| • |
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. |
| • |
Put on gloves to protect your hands. |
| • |
Take care not to scratch the body surface. |
|
| 1. |
After loosening the mounting clip and screws, then remove the rear mud guard (A). 
|
| 2. |
Installation is the reverse of removal.
| • |
Replace any damaged clips. |
|
|
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...
See also:
Troubleshooting
Troubleshooting
SymptomPossible causeRemedyHard steeringImproper front wheel alignmentExcessive turning resistance of lower arm ball jointLow tire pressureNo power assistCorrectReplaceAdjustRepai ...
Front Door Trim Components and Components Location
Component Location
1. Front door trim
...
Front Fog Lamps Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
3.
Disconnect the front fog lamp connector.
4.
Replace the ...
Hyundai Azera: Rear Mud Guard Repair procedures
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Body Side Molding / Rear Mud Guard Repair procedures
Front Mud Guard Repair procedures
Waist Line Molding Repair procedures