Troubleshooting |
Symptom | Probable cause | Remedy |
Play in steering | Loose yoke plug | Retighten |
Loose steering gear mounting bolts | Retighten | |
Loose or worn tie rod end | Retighten or replace as necessary | |
Steering wheel does not return properly | Excessive turning resistance of tie rod end | Replace |
Yoke plug excessively tight | Adjust | |
Tie rod and/or ball joint cannot turn smoothly | Replace | |
Loose mounting of gear box mounting bracket and/or worn steeringshaft joint | Retighten | |
Worn steering shaft joint and/or body grommet | Correct or replace | |
Distorted rack | Replace | |
Damaged pinion bearing | Replace | |
Twisted or damaged hoses | Reposition or replace |
Airbag Module Disposal Description and Operation
Airbag Disposal
Special tool required
Deployment tool 0957A-34100A
Before scrapping any airbags or side airbags (including those
in a whole vehicle to be scrapped), the airbags or side airba ...
Body Control Module (BCM) Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the Reinforcing panel after loosening the ...
Cylinder Head Repair procedures
Removal
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damaging the cylinder head, wait until the engine
coolant temperature drops below normal ...