Removal |
1. |
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. |
2. |
Turn the steering wheel so that the front wheels can face straight ahead. |
3. |
Remove the airbag module.
|
4. |
Disconnect the lock nut (A) & connector (B) and then
remove the steering wheel by using special service tools. (09561-11001)
|
5. |
Installation is the reverse of the removal. |
Disaseembly |
1. |
Loosen the screw(6ea) and remove the lower cover (A) from the steering wheel body. |
2. |
Disconnect the Wiring (A). |
3. |
Loosen the screw(2ea) and remove the remote control assembly (A) from the steering wheel body. |
4. |
Installation is the reverse of the removal. |
Refrigerant line Components and Components Location
Component Location
...
Temperature Control Actuator Components and Components Location
Component Location
...
Accelerator Position Sensor (APS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specification: Refer t ...