Hyundai Equus Manuals

Hyundai Azera: Rear Wheel Speed Sensor Repair procedures - ESC(Electronic Stability Control) System - Brake System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Rear Wheel Speed Sensor Repair procedures

Removal
1.
Remove the rear wheel and tire.

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.
Remove the rear wheel speed sensor mounting bolt (A).

Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 7.6 lb-ft)

3.
Remove the rear seat back.
4.
Disconnect the rear wheel speed sensor connector.
5.
Installation is the reverse of removal.
   
Install the rear sensor after lubricating the O-ring of sensor with the assembly fluid(RAREMAX AF-1).
When inserting the sensor, take care the O-ring not to be damaged.
Rear Wheel Speed Sensor Components and Components Location
Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor cable ...

Yaw-rate and G Sensor Description and Operation
Description When the vehicle is turning with respect to a vertical axis the yaw rate sensor detects the yaw rate electroniclly by the vibration change of plate fork inside the yaw rate sensor. ...

See also:

Air Ventilation Seat Components and Components Location
Components (1) 1. Ventilation blower2. Ventilation ECU3. Ventilation seat switch Components (2) ...

Engine Control Module (ECM) Repair procedures
Removal     When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used ECM] 1. Perform "ECM Neutr ...

Fuel Tank Repair procedures
Removal 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”) 2. Remove the fuel pump service cover (A) in the trunk. ...

Categories

Hyundai Azera Manuals

2011-2026 Copyright www.hgmanual.com