Hyundai Equus Manuals

Hyundai Azera: Heated Steering wheel Repair procedures - Steering wheel - Steering System - Hyundai Azera 2011-2025 Service ManualHyundai Azera: Heated Steering wheel Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Steering System / Steering wheel / Heated Steering wheel Repair procedures

Inpection
1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance(Black / Yellow, Black) - 10.0 k? ± 10% (25°C)
B.
Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 ? ± 10%
2.
Measure a temperature.
A.
The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute
B.
The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute
C.
At that time switch on, all measure point (1~8)

Heated Steering wheel Schematic Diagrams
System Circuit Diagram Terminal Function HousingPinFunctionWire colorPadAGNDBackBHEATERYellowCNTC+Back / YellowDNTC-BackRemotecontrolAGNDBackBBATRedCLEDGreenDSWITCHWhite ...

Electric Power Steering
...

See also:

Trunk Lid Assembly Repair procedures
Replacement     • When removing and installing the trunk lid, an assistant is necessary. • Wear gloves to protect hands from injury. 1. After loosening the mountin ...

Turn Signal Lamp Repair procedures
Removal Door mirror turn signal lamp 1. Disconnect the negative (-) battey terminal. 2. Remove the mirror (A). 3. Remove the outside mirror cover (A). 4. Remove the lower cover (A) of ...

Evaporator Temperature Sensor Repair procedures
Inspection 1. Ignition "OFF". 2. Disconnect evaporator temperature sensor. 3. Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor. Spe ...

Categories

Hyundai Azera Manuals


© 2011-2025 Copyright www.hgmanual.com