Hyundai Azera: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
| Specifications |
Direct control VFS[OD/C]
? Control type : Normal low type
| Control Pressure [kpa (kgf/cm?, psi)] | 500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42) |
| Current value(mA) | 50~850 |
| Internal resistance(?) | 5.1 |
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description and Operation
Description
Overdrive clutch control solenoid valve(OD/C) is attached to
the valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the overdrive clutch. ...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Schematic Diagrams
Circuit Diagram
...
See also:
Specifications
Specifications
ItemSpecificationFront/Rear parking assist system control unitRated voltageDC 12VOperation range30~120 cm(11.8~47.2 in)Operation voltageDC 9V~16VOperation currentMax. 300 mAOperati ...
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle.
This is called the GVWR (Gross V ...
Wheel Repair procedures
Lug nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
When using an impact gun, final tigh ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com