Hyundai Azera: Main Crash Pad Assembly Components and Components Location
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Crash Pad / Main Crash Pad Assembly Components and Components Location
| Component Location |
| 1. Main crash pad assembly |
Crash Pad Side Cover Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Take ...
Main Crash Pad Assembly Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Take ...
See also:
Line Pressure Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Power Window Motor Repair procedures
Inspection
Front Power Window Motor Inspection
1.
Remove the front door trim panel.
(Refer to Body - "Front Door Trim")
2.
Disconnect the connector from the motor.
3.
Connect the termina ...
Categories
Hyundai Azera Manuals
