Hyundai Azera: Rear Seat Back Cover Components and Components Location

Rear Seat Assembly Repair procedures

Replacement 1. After loosening the mounting bolts, then remove the rear seat cushion assembly (A). Tightening torque : 16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft) 2. Disconnect the r ...

Rear Seat Back Cover Repair procedures

Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and pan ...

See also:

Water Jacket Seperator Repair procedures
Removal 1. Remove the LH/RH cylinder head assembly and gasket. (Refer to Cylinder Head Assembly - "Cylinder Head") 2. Remove the water jacket seperator (A). Installation 1. Install the ...

Rear Package Tray Trim Repair procedures
Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and pan ...

TPMS Receiver Description and Operation
Operation 1. General Function A. Auto-locate/learn takes place only once per Ignition cycle. B. On successful completion, 4 road wheel sensor ID's, together with their respective road whee ...