Hyundai Azera: Rear Seat Cushion Cover Components and Components Location

Rear Seat Back Cover Repair procedures

Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and ...

Rear Seat Cushion Cover Repair procedures

Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and ...

See also:

BJ Boot Components and Components Location
Components [LH] 1. BJ assembly2. Circlip3. BJ boot band4. BJ boot 5. Dynamic damper band6. Dynamic damper7. Shaft8. TJ boot band 9. TJ boot10. Spider assembly11. Snap ring12. TJ case 13. Circl ...

Spark Plug Repair procedures
Removal and Installation 1. Remove the ignition coils. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug socket, remove the spark plug. Tightening torque : 14.7 ~ 24.5N. ...

Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. To reduce the po ...