Hyundai Azera: Reprogramming a single HomeLink® button
To program a device to HomeLink® using a HomeLink® button previously trained, follow these steps:
1. Press and hold the desired HomeLink® button.DO NOT release the button.
2. The indicator light will begin to flash after 20 seconds. Without releasing the
HomeLink® button, proceed with "Programming" step 2.
Operating HomeLink®
Erasing HomeLink® buttonsAir Cleaner Repair procedures
Removal and Installation
1.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
2.
Remove the engine cover.
3.
Remove the air duct (A).
4.
Remove the air cleaner asse ...
Fuel Tank Pressure Sensor (FTPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification: Refer to "Specification"
Removal
1.
Turn the ignition swit ...
Drive Plate Components and Components Location
Components
1. Drive plate2. Adapter plate
...