Removal |
1. |
Remove the roof trim.
(Refer to Roof Trim - "Roof Trim Assembly") |
2. |
After loosening the mounting screws, then remove the roll blind lower bracket (A). |
3. |
Remove the roll blind (A) by pulling it at a right angle.
|
Installation |
1. |
Install is the roll blind (A).
|
2. |
Install the screws to the roll blind lower bracket (A). |
3. |
Install the roof trim.
|
Keep paint and trim in good condition
Scratches or chips in the finish should be covered with "touch-up" paint as soon
as possible to reduce the possibility of corrosion. If bare metal is showing through,
the attention of a qu ...
Heated Oxygen Sensor (HO2S) Schematic Diagrams
Circuit Diagram
...
Side Airbag (SAB) Module Repair procedures
Removal
Front Side Airbag
1.
Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to Body - "Front seat as ...