Hyundai Azera: Smart key System

MTS Antenna Repair procedures

Removal Roof Antenna (GPS) 1. Remove the rear roof trim. (Refer to Body - "Roof Trim Assembly") 2. Disconnect the Connector(A) and cables (B) from the roof antenna. 3. Remove the roof an ...

Specifications

Specification Smart Key Unit ItemsSpecificationRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-30°C ~ 80°C (-22°F ~ 176°F)LoadMax. 6mA Smart Key FOB ItemsSpecificationB ...

See also:

Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ConditionOutput Voltage (V)Idle Approx. 1.21, ...

Valve clearance
Inspect excessive valve noise and/or engine vibration and adjust if necessary. An authorized HYUNDAI dealer should perform the operation. ...

Intake Actuator Description and Operation
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake selection switch will shift between re ...