Hyundai Azera: Special Service Tools

Specifications

Specification Engine & T/MJoint typeMax. permissible angleInnerOuterOuterInnerRAMDA 3.0 MPI  A/TBJ#104PTJ#10045°21°RAMDA 3.3 GDI  A/TBJ#104PTJ#10045°21° Tightening Torque It ...

Troubleshooting

Troubleshooting Trouble SymptomProbable causeRemedyVehicle pulls to one sideScoring of driveshaft ball jointReplaceWear, rattle or scoring of wheel bearingReplaceTire conicity (rotate tires, repl ...

See also:

Special Service Tools
Special Service Tools Tools(Number and name)IllustrationUse09200-38001, 09200-3N000Engine support fixture (Beam)Removal and installation of the transaxle.Except lower supporter, use beam only w ...

If engine turns over normally but does not start
1. Check fuel level. 2. With the ignition switch in the OFF position, check all connectors at the ignition coils and spark plugs. Reconnect any that may be disconnected or loose. 3. Check the fuel ...

Rear Upper Arm Repair procedures
Removal 1. Remove the rear wheel & tire (A). Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bolts when ...