Hyundai Azera: Specifications
| Specifications |
IMS Electrical System
| Item | Specification |
| Rating voltage | DC 12V |
| Operating voltage | DC 9V ~ 16V |
| Operating temperature | -30°C ~ +80°C |
| Maintaining temperature | -40°C ~ +85°C |
| Max, humid | 95% |
| Consumption current | MAX 700mA |
| Dark current | Below 2mA |
Motor Electrical System
| Item | Specification |
| Rating voltage | 13.5V (Slide, Recline, Front height, Rear height) |
| Current | Slide : 8A |
| Recline : 8A | |
| Front height : 7.5A | |
| Rear height : 7.5A | |
| At worst current | Slide : 24A |
| Recline : 20A | |
| Front height : 25A | |
| Rear height : 27A |
| Mechanical System |
| Item | Specification |
| Type | Motor with hall IC |
| Duty ratio | 50 ± 15 |
| Total stroke | Slide : 240mm |
| Recline : 63° | |
| Front height : 32mm (Motor) | |
| Rear height : 52mm (Motor) | |
| Total pulse number | Slide : 899 |
| Recline : 1,136 | |
| Front height : 333 | |
| Rear height : 412 | |
| Moving speed (Terminal voltage : 13.5V) | Slide (Forward) : 17.9 mm /sec or more, Slide (Backward) : 20.2 mm /sec or more |
| Recline : 3.5 °/ sec | |
| Front height : 7 mm / sec or more | |
| Rear height : 7 mm / sec or more |
Components and Components Location
Component Location
1. Seat Memory Unit (IMS)2. IMS control switch3. IMS driver power seat control
...
See also:
Power Door Lock Actuators Repair procedures
Inspection
Front Door Lock Actuator Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front door module.
3.
Disconnect the connector (7P) from t ...
Closing the hood
1. Before closing the hood, check the following:
All filler caps in engine compartment must be correctly installed.
Gloves, rags or any other combustible material must be removed from the
engi ...
Valve clearance
Inspect excessive valve noise and/or engine vibration and adjust if necessary.
An authorized HYUNDAI dealer should perform the operation. ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com