Hyundai Azera: Hood Insulator Pad Repair procedures
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Body (Interior and Exterior) / Hood / Hood Insulator Pad Repair procedures
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Body (Interior and Exterior) / Hood / Hood Insulator Pad Repair procedures
| Replacement |
| 1. |
Using a clip remover, detach the clips, and remove the hood insulator pad (A).
|
| 2. |
Installation is the reverse of removal.
|
Hood Assembly Repair procedures
Replacement
•
When removing and installing the hood, an assistant is necessary.
•
Be careful not to damage the hood and body.
•
When removing the clips, u ...
Hood Lift Repair procedures
Replacement
1.
Using a screwdriver (A), lift the socket clips (B) up
slightly on both ends of the lifter (C), and then remove the lifter from
the bracket (D).
2.
Installation is the revers ...
See also:
MTS Antenna Repair procedures
Removal
Roof Antenna (GPS)
1.
Remove the rear roof trim.
(Refer to Body - "Roof Trim Assembly")
2.
Disconnect the Connector(A) and cables (B) from the roof antenna.
3.
Remove the roof an ...
Water Temperature Control Assembly Repair procedures
Removal and Installation
1.
Remove the radiator upper hose and lower hose.
(Refer to Cooling System - "Radiator Hose")
2.
Disconnect the throttle body water hoses.
(Refer to Fuel System - ...
Repair procedures
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing of the related
...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com