Replacement |
1. |
Remove the front door module.
(Refer to Front Door - "Front Door Module") |
2. |
Disconnect the connector (A) and front door latch wiring harness. |
3. |
Remove the front door latch assembly (A). |
4. |
Installation is the reverse of removal.
|
Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the speci ...
General Safety Information and Caution
Precautions
General Precautions
Please read the following precautions carefully before performing the airbag system service.
Observe the instructions described in this manual, or the airbags c ...
Water Pipe Components and Components Location
Components
1. Water center pipe2. O-ring
...