Hyundai Azera: Outside Rear View Mirror Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Mirror / Outside Rear View Mirror Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

1.	Using a screwdriver or remover, remove the front frame inner cover (A).

2.	Disconnect the outside rear view mirror connector (A).

3.

After loosening the mounting nuts, then remove the outside rear view mirror (B).

Tightening torque :

6.9~10.8 N.m(0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

4.

Installation is the reverse of removal.

•	Make sure the connector is connected properly.

Outside Rear View Mirror Components and Components Location

Component Location 1. Outside rear view mirror ...

Inside Rear View Mirror Components and Components Location

Component Location 1. Inside rear view mirror ...

See also:

Front Driveshaft Components and Components Location
Component Location 1. Driveshaft(LH)2. Inner shaft bearing bracket assembly3. Driveshaft(RH) Components 1. BJ Assembly2. Clip3. BJ Boot Band4. BJ Boot5. Dynamic Damper Band6. Dynamic Damp ...

Coolant
The coolant should be changed at the intervals specified in the maintenance schedule. ...

Barometric Pressure Sensor (BPS) Specifications
Specification Pressure [kPa (kgf/cm?, psi)]Output Voltage (V)10.0 (0.01, 0.15)0.5055.0 (0.56, 7.98)2.21100.0 (1.01, 14.5)3.93115.0 (1.17, 16.9)4.50 ...

Categories

Hyundai Azera Manuals

© 2011-2025 Copyright www.hgmanual.com