Hyundai Azera: Crash Pad Side Cover Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Side Cover Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

•	Put on gloves to protect your hands.

1.	Using a screwdriver or remover, remove the crash pad side cover (A). [LH] [RH]

2.

Installation is the reverse of removal.

•	Replace any damaged clips.

Crash Pad Side Cover Components and Components Location

Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Main Crash Pad Assembly Components and Components Location

Component Location 1. Main crash pad assembly ...

See also:

Smart key unit Repair procedures
Removal - Take care not to scratch the crash pad and related parts Smart key unit 1. Disconnect the negative (-) battery terminal. 2. Remove the accelerator pedal ...

Hood Assembly Components and Components Location
Component Location 1. Hood assembly ...

Transaxle Oil Temperature Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Categories

Hyundai Azera Manuals

© 2011-2025 Copyright www.hgmanual.com