Hyundai Azera: IMS (Integrated Memory System) module Repair procedures
| Removal |
| 1. |
Remove the negative (-) battery terminal. |
| 2. |
Remove the driver seat in the car.
|
| 3. |
Remove the IMS module (A) after loosening 3 screws in the bottom of seat.
|
| 4. |
Disconnect the IMS module connector (A) and then remove the IMS module (B).
|
| Installation |
| 1. |
Install the IMS module after reconnecting the connector. |
| 2. |
Install the driver seat.
|
IMS (Integrated Memory System) module Description and Operation
IMS Power Seat Control Schematic DiagramsRear Cross Member Repair procedures
Replacement
1.
Remove the rear wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
•
Be careful not to damage to the hub ...
Components and Components Location
Components
1. Windshield glass2. Windshield glass upper molding3. Windshield glass side molding4. Windshield glass side mounting bracket
...
Input Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of Input & output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
Removal
1.
Remove the battery and the battery ...