Hyundai Azera: Engine Room Under Cover Components and Components Location

Engine Cover Repair procedures

Removal and Installation 1. Remove the engine cover (A).     • Lift up the lower end of engine cover, then left and right alternately. • When installing, confirm that t ...

Engine Room Under Cover Repair procedures

Removal and Installation 1. Remove the engine room under cover (A) and (B). Tightening torque: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)     • When removing the ...

See also:

ICM (Integrated Circuit Module) Relay Box Components and Components Location
Component Input/Output Specification No.ConnectorNo.Connector1 -11 -2 -12 -3Burglar horn13 -4 -14 -5Engine room box(Horn 15A fuse)15GND6IPM(BCM : Burglar alarm h ...

Side Impact Sensor (SIS) Repair procedures
Removal Front Side Impact Sensor 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the door scuff trim. (Refer to Body - "Door sc ...

Center Fascia Panel Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Take ...