Hyundai Azera: Front Oil Seal Repair procedures
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Engine Mechanical System / Timing System / Front Oil Seal Repair procedures
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Engine Mechanical System / Timing System / Front Oil Seal Repair procedures
| Removal |
| 1. |
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley") |
| 2. |
Remove the front oil seal (A).
|
| Installation |
| 1. |
Using SST(09231-3C100), install timing chain cover oil seal.
|
| 2. |
Install the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley") |
Front Oil Seal Components and Components Location
Components
1. Front oil seal
...
Timing Chain Cover Components and Components Location
Components
1. Timing chain cover2. Gasket
...
See also:
Fuel Pressure Control Valve (FPCV) Troubleshooting
Signal Waveform
...
Repair procedures
Starter Circuit Troubleshooting
The battery must be in good condition and fully charged.
1.
Disconnect the injector connectors.
2.
With the shift lever in N or P (A/T) ...
Front Lower Arm Repair procedures
Replacement
1.
Remove the front wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub bolts ...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com