Hyundai Equus Manuals

Hyundai Azera: Water Pipe Repair procedures - Cooling System - Engine Mechanical System - Hyundai Azera 2011-2025 Service ManualHyundai Azera: Water Pipe Repair procedures

Removal and Installation
1.
Remove the delivery pipe and injector assembly.
2.
Remove the water temperature control assembly.
(Refer to Cooling System - "Water Temperature Control Assembly")
3.
Remove the water center pipe (A).

Tightening torque:
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

   
Do not reuse water pipe O-ring.
4.
Installation is in the reverse order of removal.
Water Pipe Components and Components Location
Components 1. Water center pipe2. O-ring ...

Water pump Components and Components Location
Components 1. Water pump pulley2. Water pump 3. Water pump gasket ...

See also:

Using Voice Recognition
Starting Voice Recognition Shortly press the key on the steering wheel remote controller. Say a command. If prompt feedback is in [ON], then the system will say “Please say a command after the ...

Operation of the rear parking assist system
Operating condition This system will activate when backing up with the ignition switch ON. The sensing distance while the rear parking assist system is in operation is approximately 47 in. (12 ...

SRS Control Module (SRSCM) Description and Operation
Description The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does ...

Categories

Hyundai Azera Manuals


© 2011-2025 Copyright www.hgmanual.com