Hyundai Azera: Barometric Pressure Sensor (BPS) Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Engine Control/Fuel System / Engine Control System / Barometric Pressure Sensor (BPS) Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Engine Control/Fuel System / Engine Control System / Barometric Pressure Sensor (BPS) Specifications
| Specification |
| Pressure [kPa (kgf/cm?, psi)] | Output Voltage (V) |
| 10.0 (0.01, 0.15) | 0.50 |
| 55.0 (0.56, 7.98) | 2.21 |
| 100.0 (1.01, 14.5) | 3.93 |
| 115.0 (1.17, 16.9) | 4.50 |
Barometric Pressure Sensor (BPS) Description and Operation
Description
Barometric Pressure Sensor (BPS) is a speed-density type
sensor and is installed on the air cleaner assemby. It senses absolute
pressure of the air cleaner assemby and transfers the ...
Barometric Pressure Sensor (BPS) Schematic Diagrams
Circuit Diagram
...
See also:
Oil Cooler Components and Components Location
Components
1. Radiator2. Radiator mounting bracket3. Radiator cap4. Drain plug5. Mounting insulator
...
Blower Unit Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower unit.
(Refer to Heater - "Heater Unit")
3.
Remove the blower unit (A) from the heater unit ...
Knock Sensor (KS) Repair procedures
Removal
[Knock Sensor #1 (Bank 1)]
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the knock sensor connector (A).
3.
Remove the intake man ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com