Hyundai Azera: Input Speed Sensor Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Specifications
| Specifications |
? Type: Hall effect sensor
| Operation condition [°C(°F)] | (-40~150) -40~302 | |
| Air gap(mm)in. | (0.95~1.65)0.037~0.065 | |
| Output voltage(V) | High | 1.18~1.68 |
| Low | 0.59~0.84 | |
Input Speed Sensor Description and Operation
Description
Input speed sensor is a vital unit that measures the rate of
rotation of the input shaft inside the transaxle and delivers the
readings to the Transaxle Control Module(TCM). The sen ...
Input Speed Sensor Schematic Diagrams
Circuit Diagram
...
See also:
Hood Latch Release Handle Repair procedures
Replacement
1.
Using a screwdriver or remover, remove the hood release handle (A).
•
Use a 6mm hex bit to press the center until the handle easily pulls off the post.
...
Shift Cable Components and Components Location
Components
1. Shift lever knob2. Shift lever assembly 3. Control cable assembly4. Manual control lever (T/M side)
...
Brake Pedal Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
3.
Remove the shower duct ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com