Hyundai Azera: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description and Operation
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description and Operation
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description and Operation
| Description |
Overdrive clutch control solenoid valve(OD/C) is attached to
the valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the overdrive clutch.
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Specifications
Direct control VFS[OD/C]
? Control type : Normal low type
Control Pressure [kpa (kgf/cm?, psi)]500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)Current value(mA)50~850 Internal resis ...
See also:
Disarmed stage
The system will be disarmed when:
- The door unlock button is pressed on the smart key.
- The switch of the front outside door is pressed while carrying the smart key.
- The door is opened with the ...
Automatic Transaxle Repair procedures
Removal
1.
Engine cover.
(Refer to Engine Mechanical System - "Engine cover")
2.
Air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
3.
Battery and ba ...
Front Wheel Speed Sensor Repair procedures
Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the front wheel speed sensor mounting bolt (A).
Tighten ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com