Hyundai Equus Manuals

Hyundai Azera: Shift Lever Repair procedures - Automatic Transaxle Control System - Automatic Transaxle System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Shift Lever Repair procedures

Removal
1.
Remove the center console assembly.
2.
Remove the duct (A).

3.
Disconnect sports mode connector (A).

4.
Remove the shift cable (B).

5.
Remove the wiring (A).

6.
Remove the shift lever assembly (B) by removing the bolts (A-4ea).

Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

7.
Installation is the reverse of removal.
   
Make sure vehicle does not roll before setting room side shift lever and Automatic Transaxle(AT) side manual control lever to "N" position.
Shift Lever Components and Components Location
Components 1. Shift lever knob2. Shift lever assembly 3. Control cable assembly4. Manual control lever (T/M side) ...

Shift Cable Components and Components Location
Components 1. Shift lever knob2. Shift lever assembly 3. Control cable assembly4. Manual control lever (T/M side) ...

See also:

Heater Core Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/ recycling/ charging station. 3. When the engine is cool, drain the engine coola ...

Cowl Cross Bar Assembly Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Using My Music Mode
Playing/Pausing My Music Files While playing, press the key to pause and press again to play. ✽ NOTICE If there are no files saved within My Music, the button will be disabled. Changi ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com