Hyundai Azera: Driveshaft Assembly

Front Hub - Axle Repair procedures

Replacement 1. Loosen the wheel lug nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire(A) from front hub. Tightening torque: 88.2 ...

Front Driveshaft Components and Components Location

Component Location 1. Driveshaft(LH)2. Inner shaft bearing bracket assembly3. Driveshaft(RH) Components 1. BJ Assembly2. Clip3. BJ Boot Band4. BJ Boot5. Dynamic Damper Band6. Dynamic Damp ...

See also:

Cooling Fan Components and Components Location
Components 1. Cooling fan2. Fan motor3. Fan shroud ...

26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Sub Frame Repair procedures
Replacement 1. Remove the front wheel & tire (A). Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     • Be careful not to damage to the hu ...