Hyundai Azera: Special Service Tools

Specifications

Specifications ItemSpecificationMaster cylinder • Type • I.D. mm(in) • Piston stroke mm(in) • Fluid level switch ?Fixed type 23.81 mm (0.937 in)45 ± 1 mm (1.7 ...

Troubleshooting

Troubleshooting Problem Symptoms Table Use the table below to help you find the cause of the problem. The numbers indicate the priority of the like cause of the problem. Check each part in o ...

See also:

Smart key unit Repair procedures
Removal     - Take care not to scratch the crash pad and related parts Smart key unit 1. Disconnect the negative (-) battery terminal. 2. Remove the accelerator pedal ...

Mode Control Actuator Description and Operation
Description The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select ...

Repair procedures
Adjustment Glass Adjustment • Check the glass run channel for damage or deterioration, and replace them if necessary. 1. Remove the front door trim. (Refer to Front Door - "Front Door T ...