[Bank 1 / sensor 2, Bank 2 / sensor 2]
A/F Ratio (?)
| Output Voltage(V)
|
RICH
| Min. 0.8
|
LEAN
| Max. 0.1
|
Item
| Specification
|
Heater Resistance (?)
| 3.3 ~ 4.1[20°C(68°F)]
|
[Bank 1 / sensor 1, Bank 2 / sensor 1]
A/F Ratio (?)
| Output Voltage(V)
|
RICH
| 0.6 ~ 1.0
|
LEAN
| 0 ~ 0.4
|
Item
| Specification
|
Heater Resistance (?)
| About 9.0[20°C(68°F)]
|
Description
Heated Oxygen Sensor (HO2S) consists of the zirconium and the
alumina and is installed on upstream and downstream of the Warm-up
Catalytic Converter (WCC).
After it compares oxygen ...
See also:
Hood Lift Repair procedures
Replacement
1.
Using a screwdriver (A), lift the socket clips (B) up
slightly on both ends of the lifter (C), and then remove the lifter from
the bracket (D).
2.
Installation is the revers ...
Components and Components Location
Components
1. Rear door trim2. Rear door inside handle cap3. Rear door module4. Rear frame inner cover5. Rear door panel6. Rear door delta lower run & channel7. Rear door frame rear garnish8 ...
Components and Components Location
Component Location
1. Power door mirror2. Power door mirror switch3. Power folding mirror switch
...