Removal and Installation |
1. |
Remove the water pipe.
(Refer to Cooling System - "Water Pipe") |
2. |
Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter. |
3. |
Remove the oil filter body (A).
|
4. |
Installation is in the reverse order of removal. |
SRS Control Module (SRSCM) Repair procedures
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console.
(Ref ...
Ignition Coil Repair procedures
Removal and Installation
[LH]
1.
Disconnect the battery nagative terminal.
2.
Remove the engine cover.
3.
Disconnect the LH ignition coil connectors (A) and then remove the LH ignition ...
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST :
For a single wiping cycle, move the lever to the MIST position and release it
with the lever in the OFF position. The wipers will ...