Removal and Installation |
1. |
Disconnect the negative battery cable. |
2. |
Disconnect the driver air bag module.
|
3. |
Remove the steering wheel.
|
4. |
Loosen the screws and then remove the cover (A). |
5. |
Disconnect the steering wheel remote control switch connectors (A). |
6. |
Loosen the screw and then remove the steering wheel remote control switch assembly (A), being cautious of fixed clip. |
7. |
Remove the smart cruise control switch (A). |
8. |
Installation is reverse order of removal. |
Cowl Side Trim Components and Components Location
Component Location
1. Cowl side trim
...
Dynamic Damper Repair procedures
Replacement
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ Joint”)
3.
Using a ...
Troubleshooting
Failure Diagnosis
1.
In principle, ESC and TCS controls are prohibited in case of ABS failure.
2.
When ESC or TCS fails, only the failed system control is prohibited.
3.
However, when the ...