Hyundai Azera: Trunk Lid Latch Components and Components Location

Trunk Lid Trim Repair procedures

Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Trunk Lid Latch Repair procedures

Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

See also:

BJ Boot Components and Components Location
Components [LH] 1. BJ assembly2. Circlip3. BJ boot band4. BJ boot 5. Dynamic damper band6. Dynamic damper7. Shaft8. TJ boot band 9. TJ boot10. Spider assembly11. Snap ring12. TJ case 13. Circl ...

Windshield Deicer Repair procedures
Inspection 1. Remove the cowl top cover. (Refer to Windshield Wiper/Washer - "Front Wiper Motor") 2. Disconnect the windshield deicer connector from the wiper motor linkage. 3. Check for ...

Filter replacement
It must be replaced when necessary, and should not be washed. You can clean the filter when inspecting the air cleaner element. 1. Loosen the air cleaner cover attaching clips and open the cover ...