Hyundai Azera: Rear Console Cover Components and Components Location

Floor Console Assembly Repair procedures

Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Take ...

Rear Console Cover Repair procedures

Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Take ...

See also:

Repair procedures
Component Replacement After Deployment     Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related ...

Mode Control Actuator Description and Operation
Description The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select ...

CVVT Assembly Repair procedures
Removal 1. Remove the timing chain. (Refer to Timing System - "Timing Chain") 2. Remove the CVVT assembly. A. A: LH exhaust CVVT B. B: LH intake CVVT C. C: RH intake CVVT D. D: ...