Replacement |
|
1. |
Using a screwdriver or remover, remove the rear frame inner cover (A). |
2. |
Remove the rear door inside handle cap (B), rear door cap (C), rear door cover (D). |
3. |
After loosening the mounting screws, then remove the rear door trim (A). |
4. |
Disconnect the rear door inside handle cage (A). |
5. |
Disconnect the connector (A). |
6. |
Installation is the reverse of removal.
|
Door Scuff Trim Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
General Information
General Troubleshooting Information
Before Troubleshooting
1.
Check applicable fuses in the appropriate fuse/relay box.
2.
Check the battery for damage, state of charge, and clean and tight c ...