Hyundai Azera: Indicators And Gauges

ICM (Integrated Circuit Module) Relay Box Repair procedures

Inspection Two Turn Unlock Relay Check for continuity between the terminals. 1. There should be continuity between the No.18 and No.17 terminals when power and ground are connected to the No. ...

Components and Components Location

Component Location 1. Cluster assembly2. Seat belt switch3. Vehicle speed sensor4. Water temperature gauge sender5. Oil pressure switch6. Brake oil level switch7. Parking brake switch8. Door swit ...

See also:

Front Wheel Speed Sensor Repair procedures
Removal 1. Remove the front wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the front wheel speed sensor mounting bolt (A). Tighten ...

Schematic Diagrams
Circuit Diagram ...

Engine overheat
If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1. Pull off the road ...