Hyundai Azera: Front Oil Seal Components and Components Location

Crankshaft Damper Pulley Repair procedures

Removal and Installation     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the conn ...

Front Oil Seal Repair procedures

Removal 1. Remove the crankshaft damper pulley. (Refer to Timing System - "Crankshaft Damper Pulley") 2. Remove the front oil seal (A). Installation 1. Using SST(09231-3C100), install t ...

See also:

Cowl Top Cover Repair procedures
Replacement 1. Remove the cap (B) and remove the nuts, then remove the wiper arm (A). Tightening torque : 22.6~26.5 N.m(2.3~2.7 kgf.m, 16.6~19.5 lb-ft) 2. Disconnect the nozzle hose (B). ...

Checking the coolant level
Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses. The coolant level should be filled between F (Full) and L (Low) marks ...

Repair procedures
Inspection Front Door Lock Actuator Inspection 1. Remove the front door trim. (Refer to Body - "Front Door Trim") 2. Remove the front door module. 3. Disconnect the 7P connector from the ...