Removal and Installation |
1. |
Remove the water pipe.
(Refer to Cooling System - "Water Pipe") |
2. |
Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter. |
3. |
Remove the oil filter body (A).
|
4. |
Installation is in the reverse order of removal. |
Specifications
Specifications
Fuel Delivery System
ItemsSpecificationFuel TankCapacity70 lit. (18.5 U.S.gal., 74.0 U.S.qt., 61.6 Imp.qt.)Fuel FilterTypePaper typeFuel PressureLow Pressure Fuel Line480 ~ 520 ...
Fender Garnish Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...
Transaxle Oil Temperature Sensor Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...