Hyundai Azera: 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation

Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Specifications Direct control VFS[26/B] ? Control type : Normal low type Control Pressure [kpa (kgf/cm?, psi)] 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54)Current value(mA)50~850 Internal resi ...

See also:

Automatic transaxle operation
The automatic transaxle has 6 forward speeds and one reverse speed. The individual speeds are selected automatically, depending on the position of the shift lever. ✽ NOTICE - If the battery h ...

Front Oil Seal Repair procedures
Removal 1. Remove the crankshaft damper pulley. (Refer to Timing System - "Crankshaft Damper Pulley") 2. Remove the front oil seal (A). Installation 1. Using SST(09231-3C100), install t ...

Description and Operation
Description Front blind camera is a supplemental system that shows blind spot in front of the vehicle through the AV monitor. The front blind camera will operate when you push the button and shi ...