Hyundai Azera: Shift Cable Components and Components Location

Shift Lever Repair procedures

Removal 1. Remove the center console assembly. (Refer to Body - "Console") 2. Remove the duct (A). 3. Disconnect sports mode connector (A). 4. Remove the shift cable (B). 5. Remo ...

Shift Cable Repair procedures

Removal 1. Remove the center console assembly. (Refer to Body - "Console") 2. Remove the duct (A). 3. Remove the control cable (B). 4. Remove the control cable assembly in the vehicle ...

See also:

Fuel Pressure Control Valve (FPCV) Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel ...

Hood Insulator Pad Repair procedures
Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Installation is the ...

Front Hub - Axle Repair procedures
Replacement 1. Loosen the wheel lug nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire(A) from front hub. Tightening torque: 88.2 ...