Hyundai Azera: Driveshaft and axle

Shift Cable Repair procedures

Removal 1. Remove the center console assembly. (Refer to Body - "Console") 2. Remove the duct (A). 3. Remove the control cable (B). 4. Remove the control cable assembly in the vehicle ...

General Information

...

See also:

Fluid Components and Components Location
Components Location 1. Injection hole(eyebolt)2. Oil level plug3. Oil drain plug ...

Engine Coolant Temperature Sensor (ECTS) Description and Operation
Description Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor whose ...

Receiver-Drier Repair procedures
Replacement 1. Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser. Tightening torque : 9.8~14.7N.m (1.0~1.5kgf.m, 7.2~10.8 lb-ft) 2. Remove ...