Hyundai Azera: Rear Mud Guard Repair procedures
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Body Side Molding / Rear Mud Guard Repair procedures
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Body Side Molding / Rear Mud Guard Repair procedures
| Replacement |
|
| 1. |
After loosening the mounting clip and screws, then remove the rear mud guard (A).
|
| 2. |
Installation is the reverse of removal.
|
Front Mud Guard Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...
Waist Line Molding Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...
See also:
Hood Latch Release Handle Components and Components Location
Component Location
1. Hood latch release handle
...
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Repair procedures
Replacement
[Removal]
•
Put on gloves to protect your hands.
•
Use seat covers to avoid damaging any surfaces.
1.
Remove the roof side molding.
(Refer to Bod ...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com