Hyundai Azera: IMS (Integrated Memory)

Body Control Module (BCM) Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the Reinforcing panel after loosening the ...

Specifications

Specifications IMS Electrical System ItemSpecificationRating voltageDC 12VOperating voltageDC 9V ~ 16VOperating temperature-30°C ~ +80°CMaintaining temperature-40°C ~ +85°CMax, humid95%Consump ...

See also:

TPMS Sensor Description and Operation
Description 1. Mode (1) Configuration State A. All sensors should be in the Low Line state. B. In High Line configuration, sensor transmissions occur every 1 minute (nominal) and pressure ...

Center Pillar Trim Repair procedures
Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and ...

Good driving practices
Never move the shift lever from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed. Never move the shift lever into P (Park) when the vehicle is in motion. Be ...